Two-way overspeed governor VEGA 300 from Dynatech for use in the machine room or in the elevator shaft. The overspeed governor VEGA 300 is suitable for detecting and preventing uncontrolled cabin movement (UCM). The limiter is made in a design that prevents corrosion.
The overspeed governor can be used with cables with diameters of 6 mm / 6.5 mm.
The overspeed governor includes an overspeed contact, protection against ropes falling out and a safety switch with automatic reset (up to a nominal speed of 1 m/s inclusive).
The VEGA overspeed governor can optionally be equipped with the following accessories:
- A3 coil for UCM, voltage 24VDC, 48VDC or 190VDC
- Coil for remote tripping (testing), voltage 24VDC, 48VDC or 190VDC
- Remote electric reset, voltage 24VDC, 48VDC or 190VDC
- Overspeed gvernor cover (separate item, not included in governor packages)
The VEGA overspeed governor cannot be used for reverse mounting on the shaft ceiling, so-called "upside down".
Technical specification:
| Nominal speed: | 0,50 m/s |
| Tripping speed: | 0,70 m/s |
| Pulley’s diameter: | 300 mm |
| Hardened groove: | NO |
| UCM (A3): | YES, 190 VDC |
| Remote tripping: | YES, 190 VDC |
| Remote electric reset: | NO |
