Compact LED lighting module for the elevator platform. The module contains 3 LEDs and a built-in battery, which will ensure platform lighting even in the event of a power outage.
LED platform lighting is supplied separately without accessories. It is also possible to order it in a set with a supply cable, wire terminals and dowels with screws.
Product specification:
| Model: | LWAL-003E |
| Performance: | 3 x 1W |
| Input voltage: | AC 110-265V 50/60Hz |
| Light temperature: | 6000-6500K |
| Light source: | LED |
| Number of LEDs: | 3 |
| Power factor: | 0,95 |
| Uniform Glare Rating (UGR): | <19 |
| Luminous flux: | 330-360 lm |
| Brightness efficiency: | 110-120 lm/W |
| Dimmable type: | NE |
| CRI: | 80>= |
| Lighting angle: | 30-120° |
| Service life: | 50 000 hours |
| Dimensions: | 178x72x30mm |
| Emergency lighting time: | 180min |
| Materials: | Aluminium |
| Color: | Silver |
Notes before installation:
1. Install only by qualified electricians.
2.Make sure the power supply is disconnected before installation.
3. Make sure the voltage is suitable for the lighting and connect the L/N/G correctly.
4. All lights should not be covered from above or below during installation or use.
5. Do not open the lamps without the manufacturer's permission.
Installation:
1. Connect the wires for AC 85 - 265 V.
2. Mount directly on the wall.