Product description
Flat traveling cables are an integral part of every elevator shaft electrical installation. Flat traveling cables ensure the power supply of the electrical installation on and in the cabin and the communication of the electrical parts of the cabin with the lift controler.
The individual wires are, in the main insulating tube, placed next to each other in a white insulating tube marked with black numbers (except for the green-yellow wire). Only indoor use of cables is recommended.
Technical parameters:
Number of wires: | 12 |
Conductor cross-section: | 0,75 mm2 |
Rated voltage: | 300 V / 500 V |
Test Voltage: | 2000 V |
Maximum free hanging length: | 45 m |
Maximum travel speed: | 4 m/s |
Operating temperature range: | -15 °C až 70 °C |
Minimum bending radius: | 25 x cable height |
Dimensions (height x width): | 4,1 mm x 33 mm |
Standards: | EN 50214 / EN 60228 / EN 50363 |
Resistance of one conductor: | 26,0 Ω/km |