Compact LED lighting module for the elevator platform. The module contains 7 LEDs and a built-in motion sensor, which ensures platform lighting only if there is a person on the elevator platform, thus saving the cost of electricity for lighting.
LED platform lighting is supplied separately without accessories. It is also possible to order it in a set with a supply cable, wire terminals and dowels with screws.
Product specification:
Model: | LWAL-007S |
Performance: | 7 x 1W |
Input voltage: | AC 100-265V 50/60Hz |
Light temperature: | 6000-6500K |
Light source: | LED |
Number of LEDs: | 7 |
Power factor: | 0,95 |
Uniform Glare Rating (UGR): | <19 |
Luminous flux: | 770-780 lm |
Brightness efficiency: | 110-120 lm/W |
Dimmable type: | NE |
CRI: | 80>= |
Lighting angle: | 30-120° |
Service life: | 50 000 hours |
Dimensions: | 178x72x30mm |
Motion sensor: | YES, 20 s |
Materials: | Aluminium |
Color: | Silver |
Notes before installation:
1. Install only by qualified electricians.
2.Make sure the power supply is disconnected before installation.
3. Make sure the voltage is suitable for the lighting and connect the L/N/G correctly.
4. All lights should not be covered from above or below during installation or use.
5. Do not open the lamps without the manufacturer's permission.
Installation:
1. Connect the wires for AC 85 - 265 V.
2. Mount directly on the wall.